Hi Guys,
what has to be done to play pod in 800 x 600 pix mode.
Something to change in ubi.ini but what was it in detail ?
Please help...
thanks and regards, Bandie
PS: Is there a way to play in more higher solutions ?
pod in 800x600
- megapolpod
- Messages : 105
- Inscription : 07 oct. 2003 18:31
- Contact :
Hi Bandie,
yes it is possible to play in higher solution with the wrapper from degee. Click on the second Register of the setup of the wrapper. exe. In this page you will find the word solution. Chance it to 1024 x768 it is the biggest format.
Dann schiebst du die Dgvoodoo.exe in die wp3dfx.exe einfach rein, du solltest Pod dann in einen Fenster in der Auflösung sehen die du eingestellt hast
Gruß
Megapolpod
yes it is possible to play in higher solution with the wrapper from degee. Click on the second Register of the setup of the wrapper. exe. In this page you will find the word solution. Chance it to 1024 x768 it is the biggest format.
Dann schiebst du die Dgvoodoo.exe in die wp3dfx.exe einfach rein, du solltest Pod dann in einen Fenster in der Auflösung sehen die du eingestellt hast
Gruß
Megapolpod
- megapolpod
- Messages : 105
- Inscription : 07 oct. 2003 18:31
- Contact :
Hi Bandie,
hier ein Ausschnitt was du ändern musst:
Gruß
Megapolpod
hier ein Ausschnitt was du ändern musst:
Code : Tout sélectionner
You MUST have either POD Gold or POD patched with the 24 MB 3Dfx patch. I am also running the GS-II Patch, I'm not sure if that will affect it or not.
Find your UBI.INI file, it should be in the [C:\WINDOWS\UBISOFT] folder, and MAKE A COPY OF IT.
Now open the UBI.INI file. If you found it using the Windows Explorer, just double-click the filename to open it in NotePAD.
Now we begin to change/add lines to the file. With each line shown below, first look for it in the UBI.INI file, and if you find it, change the value to match. If you don't find the line, then add it, typing it exactly as shown:
Under the [SYSTEM] heading, set the line MMX=1 if you have a Pentium MMX or Pentium II CPU.
Then, under the [POD2_0] heading, set the following lines:
SizeView=0
DisplayMode=6
ModeCameraSingle=6
BkGround=1
Close the file, and be sure to save the changes you just made.
Now run POD and see what happens. All the menus will still be in 640x480, but if it worked, when you start a race, you will see POD in 800x600. Of course, if POD is totally messed up, all you need to do is restore the copy of the UBI.INI file you took in Step 2, and everything should be back to normal.
Megapolpod